To connect Arzopa portable monitor to your PC, you can follow these steps:

Check the interfaces:

First, determine which video output interfaces your PC has, common interfaces include HDMI, USB-C, DisplayPort, etc.

Choose the right cable:

Choose the corresponding connection cable according to the interface type of the PC. For example, if the PC has an HDMI interface, use an HDMI-Mini HDMI cable; if have USB-C interfaces and support USB-C video transmission, you can use a USB C-C cable. Please note that it must be a USB C-C cable capable of transmitting video signals. If the port is neither HDMI nor USB C, then relevant converters will be required. For example, DP to MiniHDMI, VGA to MiniHDMI, etc.

Connect the monitor:

Plug one end of the cable into the corresponding interface of the PC and the other end into the corresponding interface of the Arzopa portable monitor. Make sure the connection is secure.

Power the monitor:

Plug in the Arzopa portable monitor. For specific power supply methods, please refer to How do I charge my Arzopa portable monitor?

Set the display mode (on the PC):

Enter the operating system settings of the PC and find the "Display" or "Screen" related setting options. Here, you should be able to detect the connected Arzopa portable monitor. Usually, the following display modes can be selected:

Duplicate: Display the same content on the PC screen and the portable monitor.

Extend: Extend the desktop to the portable monitor to display different content on the two screens.

Display only on the portable monitor (or only on the PC screen): Select one of the screens as the only display device according to your needs.

Adjust resolution and other display settings (optional):

Adjust the resolution, refresh rate, brightness, contrast and other parameters in the display settings according to your personal preferences and the performance of different models of Arzopa monitor to obtain the best display effect.